OBD2

OBD2 AUTO DIAGNOSTIC TOOL with ANDROID TABLET

OBD2 AUTO DIAGNOSTIC TOOL PRODUCT FEATURES:

  1. High-speed, medium speed and low speed CAN-BUS, Single CAN-BUS diagnosis protocols is supported.
  2. Can check out the year and model of the vehicles automatically and quickly.
  3. All inclusive software coverage – European, American, Asian and Australian prevalent vehicles.
  4. OBDII diagnostic connector has a wide compatibility, which don’t need to replace other connector, during the testing.
  5. Hardware architecture uses new design with multiple protection, interference and stability. Built-in overvoltage protection module is applied, in order to protect scanner and vehicle against accidental damage during checking.
  6. Can work stably in high and low temperature environment, and work well.
  7. Support Android System

 

SPECIFICATIONS OBD2 AUTO DIAGNOSTIC TOOL :

MCU: ARM7 processor, 66MHz

Input Voltage: DC 8-18V

Communication Mode: WIFI

Dimension: Approx. 137mm*175mm*63mm

Unit Weight: Approx. 250g (GW)

SPECIFICATIONS TABLET ANDROID :

–       Size (Main Display) 8.0″

–       Rear Camera – Resolution 8.0 MP

–       Front Camera – Resolution 2.0 MP

–       RAM Size (GB) 2

–       ROM Size (GB) 32

–       Network/Bearer 2G, 3G, 4G

–       USB Version USB 2.0

–       Earjack 3.5mm Stereo

–       Wi-Fi

–       Bluetooth

–       Battery Capacity (mAh, Typical) 5100

 

PACKING LIST:

OBD2 Auto Diagnostic Tool + Tablet Android

 

Function Covered :

1.        Quick Test,

2.        Read ECU Info.,

3.        Read DTCs,

4.        Erase DTCs,

5.        Clear learning value,

6.        Data Stream,

7.        Actuations,

8.        Read freeze frame data,

9.        Read/Write VIN,

10.     Basic Reset,

11.     Control unit adaptations,

12.     Throttle adaptations,

13.     Air bleeding,

14.     Level calibration,

15.     Theft alarm Reset,

16.     Key programming,

17.     Oil change,

18.     Idle speed learning,

19.     Idle speed Adjustment,

20.     Ignition timing adjustment,

21.     Maintenance functions,

22.     ECU Initial startup,

23.     ECU initialization

Supported Full Systems:

–       ME-Motor electronics,

–       CDI-Common Rail Diesel Injection,

–       ETC-Electronic transmission control,

–       ESM-Electronic selector module,

–       SBC-Sensotronic Brake Control,

–       ESP-Electronic stability program,

–       BAS-Brake assist, Suspension,

–       TPC-Tire pressure monitor, Airbag,

–       CGW-Central gateway,

–       EIS-Electronic ignition switch,

–       OCP-Overhead control panel,

–       UCP-Upper control panel,

–       XALWA-Xenon headlamp,

–       HRA-Headlamp range control,

–       ATA-Anti-theft alarm system,

–       IC-Instrument cluster,

–       ASSYST-Active Service System,

–       SCM-Steering column module,

–       EPS-Electrical power steering,

–       PTS-Parktronic system,

–       EPB-Electric parking brake,

–       COMAND/AUDIO,

–       CD/DVD, TV tuner, CTEL-Cellular telephone,

–       DCM-Door control module,

–       ESA driver-Electric seat adjustment driver, ESA passenger-Electric seat adjustment passenger,

–       AAC-Air conditioning,

–       WSS-Weight sensor system,

–       SVMCM-Special vehicle multifunction control module.

 

car covered