LXC3120 AUTO MAIN FAILURE - Genset Controller

LXC3120 AUTO MAIN FAILURE – Genset Controller

Specification
Working Voltage DC8. 0V to 35. 0V, Continuous Power Supply.
Overall Consumption <3W(Standby mode: ≤2W)
AC voltage Input:
3 Phase 4 Wire 15V AC – 360 V AC (ph-N)
2 Phase 3 Wire 15V AC – 360 V AC (ph-N)
Single phase 2 Wire 15V AC – 360 V AC (ph-N)
3 Phase 3 Wire 30V AC – 620 V AC (ph-ph)
Alternator Frequency 50 Hz /60Hz
Speed Sensor Voltage 1.0V to 24V (effective value)
Speed Sensor Frequency 10,000 Hz (max)
Start Relay Output 5A DC28V power supply
Programmable Relay Output 1 5A DC28V power supply
Programmable Relay Output 2 5A DC28V power supply
Programmable Relay Output 3 5A DC28V power supply
Programmable Relay Output 4 5A AC250V voltage-free output
Programmable Relay Output 5 5A AC250V voltage-free output
Overall Dimensions 143mm x 115mm x41mm
Panel Cutout 110mm x 90mm
CT Secondary Current 5A (rated)
Working Condition Temperature: (-25~70)ºC; Humidity: (20~93)%RH
Storage Condition Temperature: (-25~70)ºC

 

Protection Level
IP55:When waterproof rubber seal installed between the controller
and panel fascia.
IP42:When waterproof rubber seal is not installed between the
controller and panel fascia.
Insulation Intensity
Object: input/output/power
Quote standard: IEC688-1992
Test way: AC1.5kV/1min leakage current:3mA
Weight 330g