Entries by Al-Najjah Admin

ATE-ABSFDA-12 ABS SYSTEM WITH FAULT DIAGNOSIS WITH 4 AXIS

ABS System with Fault Diagnosis with 4 Axis is designed to study ABS work systems complete with circuits, hydraulic pressure, and can do trouble shooting.   Composition: ABS (Automatic Brake System) Engine control TCS with ECU Wheel speed sensor Master cylinder Vacuum Brake booster 4 x inverter, AC 380Volt 1HP Motor 12Volt battery auto charging […]

ATE-LGABW-18 LIGHTING AND CAN BUS WORKSHEET

Used for interactive learning about light and can bus electrical systems on light vehicles. Specification: 1. Lighting system with head lamp, tail lamp, turning light and interior lamp 2. All lighting systems used can bus 3. High speed can bus 4. Low speed can bus 5. Measuring point of high and low can 6. Instrument […]

ATE-HPST-28 HYDRAULIC POWER STEERING TRAINER

Used for interactive learning about the hydraulic system in power steering on light vehicles. Specification: 1. Type: Rack and pinion 2. Hydraulic unit: power steering pump, regulator valve and pressure pipe 3. Suspension: Coil and Shock Absorber 4. Driven motor: AC 220V 5. Instrument panel: manometer, main key and indicator lamp

ATE-HEVPS-14 HYBRID ELECTRIC VEHICLE PARALLEL SIMULATOR

Used for interactive learning about hybrid electric systems, such as high voltage AC currents, electrical interlocks, AC-DC current converters, battery connections, solar panels and photovoltaics in light vehicles. Features: 1. Hybrid drives are essentially meant to meet three objectives: save fuel, reduce emissions, and increase torque / power. 2. Different hybrid concepts can be employed […]

ATE-EPST-27 ELECTRIC POWER STEERING TRAINER

Used for interactive learning about the electrical hydraulic system on power steering in light vehicles. Specification: 1. Type: Rack and pinion 2. System: ECU, VSS Simulator, Rpm Simulator 3. Suspension: Coil and Shock Absorber 4. Instrument panel: speedometer, main key and DLC 5. Battery approx. 12V / 32AH

ATE-EMG-20 ENGINE MANAGEMENT SYSTEM

Used for interactive learning about electronic control management in combustion systems and injection systems in light vehicles. Trainers and its component consist of: 1. Sensors and Actuators 2. Electronic Control Unit (ECU) 3. RPM meter and Indicator lamp 4. Data link Connector 5. Driven motor and speed regulator 6. Battery approx. 12V / 32 AH.

ATE-ARBST-16 AIR BAG SIMULATOR AND TRAINER

Used for interactive learning about air bag systems and seat belts on light vehicles. Specification: 1. Air bag sensor consist of: – Frontal driver and passenger – Side air bag sensor 2. Air bag actuator / Air Generator consist of: – Frontal / longitudinal air bag driver – Frontal / longitudinal passenger – Passenger and […]

ATE-CRST-26 CHARGING SYSTEMS TRAINER

Used for interactive learning about battery charging systems on light vehicles. Specification: Electric driven AC 220V motor regulated by inventor Alternator approx. 14V / 60AH Electronic Regulator Regulated Load Lamp Charging control lamp, volt meter, ampere meter Main key, Fuse Battery approx. 12V / 32AH